Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Electrical Engineeringen_US
dc.contributor.advisorZhang, A. Ping (EE)en_US
dc.creatorCao, Jinglin-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/11867-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic Universityen_US
dc.rightsAll rights reserveden_US
dc.titleGlucose microsensor based on GOD/Chitosan/PEGDA-modified interdigital microelectrodeen_US
dcterms.abstractDiabetes is a frequently occurring and common disease worldwide, and the third most common disease after cardiovascular and cancer. In recent years, there has been an endless stream of glucose testing techniques and methods. Among these methods, glucose electrochemical sensors, which have the advantage of high selectivity, high sensitivity, and can be rapid response, have attracted a lot of attention.en_US
dcterms.abstractElectrochemical enzyme biosensor is a sensor that combines electrochemical analysis methods with enzyme biotechnology. It not only has the specific catalytic properties of enzymes, but also has the advantages of sensitivity, rapidity, and easy operation of electrochemical sensors. The glucose electrochemical sensor uses glucose oxidase (GOD) to immobilize on the surface of the electrode as the identification element, and detect the glucose concentration by measuring the electrical signal.en_US
dcterms.abstractIn this thesis, a novel glucose sensor with hydrogels as the carrier of GOD has been successfully fabricated. The hydrogels are combined with GOD, chitosan and poly(ethylene glycol) diacrylate (PEGDA). In order to improve the signal-to-noise ratio of detection, the whole sensor is made into micro interdigital electrode. The sensing area of this sensor is around 0.54mm2, and the minimum electrode width is designed to be 11.5 micrometers. To reduce the potential of enzyme reaction and reduce the influence of oxygen, Prussian blue (PB) is selected to be the electron mediator. Cysteamine (CYS) modified gold surface is used as electrode substrate, to enhance the curing ability of the hydrogel on the gold electrode.en_US
dcterms.abstractThe test results show that the glucose sensor can produce different response signals to different concentrations of glucose, and the signal result is basically linear. Further analysis about this sensor shows that the detection range is 0.06-15.3mmol/L, sensitivity is 3.485μA mM−1 cm−2, with the response time is 40s. Further experiments show that the electrode width and gap of the interdigital electrode have an effect on the signal response and intensity, the smaller the electrode width, the higher the signal strength.en_US
dcterms.extentxi, 68 pages : color illustrationsen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2020en_US
dcterms.educationalLevelM.Sc.en_US
dcterms.educationalLevelAll Masteren_US
dcterms.LCSHElectrochemical sensoren_US
dcterms.LCSHTransducers, Biomedicalen_US
dcterms.LCSHBlood glucose monitoringen_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
6355.pdfFor All Users (off-campus access for PolyU Staff & Students only)2.28 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/11867