Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor | Multi-disciplinary Studies | en_US |
| dc.contributor | Department of Mechanical Engineering | en_US |
| dc.creator | Chan, Chi-kin | - |
| dc.identifier.uri | https://theses.lib.polyu.edu.hk/handle/200/1521 | - |
| dc.language | English | en_US |
| dc.publisher | Hong Kong Polytechnic University | - |
| dc.rights | All rights reserved | en_US |
| dc.title | Development of an error compensation system for taper turning using ARX modeling techniques | en_US |
| dcterms.abstract | In this project, the Forecasting Compensation Control (FCC) strategy is investigated to improve the roundness error in tape turning. This Forecasting Compensatory control (FCC) had been developed to compensate for both repeatable and nonrepeatable errors. This strategy, based on active error sensing, stochastic modeling and forecasting control by Dynamic Data System methodology, has been applied successfully in the past to roundness control in taper turning. As a consequence of recent hardware and software development, error reduction methods by compensation are gaining more acceptance over error avoidance strategies. By using a new approach, the FCC strategy is combined with Autoregressive with Exogenous Input (ARX) algorithm and using a 3D Force measurement device. The error model of the relative motion and force in X and Y direction can be captured. Through the software programming, the error is autoregressive updated, forecasted and compensation command is obtained. Then this command is sent to a piezoelectric actuator which moves the cutter to compensate for the error motion. Through the taper turning experiment with the FCC system and different parameters setting of the recursive algorithm, it was demonstrated that the workpeice roundness can be improved by 33.2%. | en_US |
| dcterms.extent | xiv, 151 p. : ill. ; 31 cm | en_US |
| dcterms.isPartOf | PolyU Electronic Theses | en_US |
| dcterms.issued | 1999 | en_US |
| dcterms.educationalLevel | All Master | en_US |
| dcterms.educationalLevel | M.Sc. | en_US |
| dcterms.LCSH | Machining -- Computer simulation | en_US |
| dcterms.LCSH | Error analysis (Mathematics) | en_US |
| dcterms.LCSH | Hong Kong Polytechnic University -- Dissertations | en_US |
| dcterms.accessRights | restricted access | en_US |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| b1460517x.pdf | For All Users (off-campus access for PolyU Staff & Students only) | 4.58 MB | Adobe PDF | View/Open |
Copyright Undertaking
As a bona fide Library user, I declare that:
- I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
- I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
- I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.
By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.
Please use this identifier to cite or link to this item:
https://theses.lib.polyu.edu.hk/handle/200/1521