Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor | Jockey Club Rehabilitation Engineering Centre | en_US |
| dc.creator | Chiu, Sun-wang | - |
| dc.identifier.uri | https://theses.lib.polyu.edu.hk/handle/200/1809 | - |
| dc.language | English | en_US |
| dc.publisher | Hong Kong Polytechnic University | - |
| dc.rights | All rights reserved | en_US |
| dc.title | A retrospective study on the effectiveness of capod CAD/CAM system for patients with adolescent idiopathic scoliosis | en_US |
| dcterms.abstract | Scoliosis is a 3-dimenional deformity of spine. If untreated, it may affect the trunk balance, cosmetic appearance of the body and cardiopulmonary function. For Adolescent Idiopathic Scoliosis (AIS) patients with Cobb's angle between 21o and 45o, spinal orthosis is usually prescribed until skeletal maturity. For the conventional method, Plaster of Paris (POP) bandages are used to get the contour of the patient's body. The CAD/CAM system to prosthetics and orthotics has been developed over two decades. It is a series of automated processes from scanning or digitizing of body shape, to fabrication of positive model by numerical controlled milling machine. A CAD/CAM system was set up in the Department of Prosthetics and Orthotics, Prince of Wales Hospital in Hong Kong at the end of 1998. The aims of this study were to assess the effectiveness of spinal orthoses, the work flow time of making spinal orthoses and learning time of clinicians with the CAD/CAM approach implemented in Prince of Wales Hospital. One hundred and forty-seven clinical records of scoliotic patients were collected for the comparison between the conventional method and the CAD/CAM method. The results showed that significant decreases were found in Cobb's angles when comparing to the pre-brace data. Significant decrease was also found in apical vertebral rotation in the conventional method. However, no significant difference was found on the trunk listing for the two methods. The productivity of spinal orthosis was found to be 275% higher in the CAD/CAM method than that of the conventional method in the studied period. Regarding the learning time, clinicians became more familiar with the technique of application of the CAD/CAM method to make spinal orthoses in a few years. Significant decreases were found in the learning time except the number of time of scanning when comparisons were made between 1999 and the following three years. As the CAD/CAM method can obtain similar clinical results in comparison with the conventional method, it can be considered to substitute the conventional method in making of spinal orthoses for AIS patients. | en_US |
| dcterms.extent | xi, 54 leaves : ill. ; 30 cm | en_US |
| dcterms.isPartOf | PolyU Electronic Theses | en_US |
| dcterms.issued | 2004 | en_US |
| dcterms.educationalLevel | All Master | en_US |
| dcterms.educationalLevel | M.Sc. | en_US |
| dcterms.LCSH | Hong Kong Polytechnic University -- Dissertations | en_US |
| dcterms.LCSH | Scoliosis -- Patients -- Rehabilitation | en_US |
| dcterms.LCSH | CAD/CAM systems | en_US |
| dcterms.accessRights | restricted access | en_US |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| b17810425.pdf | For All Users (off-campus access for PolyU Staff & Students only) | 2.26 MB | Adobe PDF | View/Open |
Copyright Undertaking
As a bona fide Library user, I declare that:
- I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
- I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
- I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.
By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.
Please use this identifier to cite or link to this item:
https://theses.lib.polyu.edu.hk/handle/200/1809