Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Civil and Structural Engineeringen_US
dc.creatorHu, Wenfeng-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/2424-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleSynthesis of polyhydroxyalkanoates (PHA) from excess activated sludgeen_US
dcterms.abstractThis study focused on the polyhydroxyalkanoates (PHA) synthesis from excess activated sludge (EAS), collected from a laboratory-scale sequencing batch reactor or a full-scale municipal wastewater treatment plant (MWWTP), via monitoring and precisely controlling the dissolved oxygen (DO) of the cultural media through an oxidation-reduction potential (ORP) setup instead of conventional DO system from different carbon sources. No matter what types of EAS was submitted to PHA synthesis, by using fatty acids of shorter chain length including acetate and propionate as carbon sources, the total organic carbon (TOC) removal efficiency was higher than those of longer chain length. When C-even numbered fatty acids such as acetate and butyrate was used as sole carbon source respectively, PHB homopolymer or PHA with dominant 3HB unit was synthesized. Otherwise, PHBV copolymer with 3HV major units was synthesized instead of the PHB homopolymer when C-odd numbered fatty acids, propionate and valerate, were used as sole carbon sources. Increase the concentration of C-odd numbered fatty acids in the cultural medium, may result in the decrease of PHA content in EAS. The melting temperatures of the PHBV copolymer produced by EAS decreased with the increasing of 3HV molar fraction in the PHBV. When acetate was used as carbon substrate, the minimum PHA content at ORP -30mV was about 12% (w/w) of cell dry weight (CDW). The maximum PHA content of 35% (w/w) was achieved when ORP was +30mV. By using propionate as carbon substrate and ORP was +30mV, the PHBV copolymer content, polymer production yield and 3HV molar fraction were 25.8%, 0.38 (g/g) and 78.0 mole%, respectively. Decreasing of ORP from +l00mV to -30 mV by adjusting the air flow rate pumped into the cultural broth, equivalent to the DO concentration, resulted in the variation of 3HV mole fraction in the PHBV from 0 mole % to 21 mol% while acetate as carbon source. In other words, these variations were resulted from the changes of DO concentration. When EAS from full-scale MWWTP was conducted for the PHA production from glucose, the polymer content in percentage of CDW increased with the increasing of ORP levels. The 3HV unit content in the PHBV increased from 11.1 mol% to 78.4 mol% with the decreasing of ORP from +l0mV to -20mV by lowering the air flow rate. These results were in accordance with that of acetate and propionate as carbon sources. It was believed that monitoring and controlling the fermentation process by ORP instead of DO provided more sensitive, reliable and precise controll. Slight variation of DO concentration in cultural broth could be observed and realized by ORP system. A hypothesized biochemical metabolic model by using glucose as sole carbon source was estabolished. It is postulated that TCA cycle and glyoxylate pathway are involved in the PHA accmulation even under anoxic and anaerobic condtions. The most important view in this hypothetic model is that the oxygen is the key exogenous factor to regulate 3HV mole fraction in PHBV copolymer. These observations and the hypothesized model in this study may provide experimental evidence to that TCA cycle and glyoxylate pathway might be involved in the PHA production and phosphorus removal in the Enhanced Biological Phosphorus Removal process.en_US
dcterms.extentxxiii, 307 leaves : ill. (some col.) ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2004en_US
dcterms.educationalLevelAll Doctorateen_US
dcterms.educationalLevelPh.D.en_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.LCSHPolymers -- Biodegradationen_US
dcterms.LCSHSewage -- Purification -- Activated sludge processen_US
dcterms.LCSHPolyesters -- Synthesisen_US
dcterms.LCSHSludge bulkingen_US
dcterms.accessRightsopen accessen_US

Files in This Item:
File Description SizeFormat 
b17726840.pdfFor All Users12.73 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/2424