Full metadata record
DC FieldValueLanguage
dc.contributorMulti-disciplinary Studiesen_US
dc.creatorLai, Wai-man Raymond-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/3192-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleApplication of genetic algorithm in reactive power/voltage control problemen_US
dcterms.abstractReactive power / voltage control is an very attractive topic for discussion. There were many different methods provided by researchers for solving the problem, such as using expert system, linear programming, non-linear programming and fuzzy linear programming. Reactive power / voltage control problem solved by a genetic algorithm (GA) has been developed and implemented in this project. A genetic algorithm is used as a tool of optimization, which is based on the mechanics of natural selection and natural genetics. A genetic algorithm is a simple optimization algorithm. It is very convenient to implement in any optimization problem. It is also system independent. It can be used for solving linear and non-linear problems. It can find a global or near global solution. So I chose it as an optimization tool to solve the reactive power / voltage control problem. The successful of this approach will be shown and discussed in this dissertation. In a power system, there is a certain value of voltage (V) and reactive power (Q) at each bus. For a generator bus, the value of Q is an dependent variable. Similarly, the value of V for a load bus is also an dependent variable. These variables are depended on the system situation. If these variables are out of their limited range, the system will be violated and the system operator must take an appropriate action as soon as possible in order to alleviate the problem. In this project, we consider a generator voltage control, reactive power compensator and tap change transformer as control variables. After the based case load flow calculation, we can check the limitation of each bus. If one of the bus is violated, we can use GA to alleviate it. During the optimization, we try to minimize the system real power loss and minimize the operation. At the same time the system constraints must be satisfied. We can also assign a penalty factor to each control variable. The large value of penalty factor for the control variable, the less change for that control variable is preferred and vice versa. It can let a system operator to set the priority for each system control variable.en_US
dcterms.extentiii, 96 leaves : ill. ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued1998en_US
dcterms.educationalLevelAll Masteren_US
dcterms.educationalLevelM.Sc.en_US
dcterms.LCSHReactive power (Electrical engineering)en_US
dcterms.LCSHGenetic algorithmsen_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
b14211427.pdfFor All Users (off-campus access for PolyU Staff & Students only)3.04 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/3192