Full metadata record
DC FieldValueLanguage
dc.contributorMulti-disciplinary Studiesen_US
dc.contributorDepartment of Civil and Structural Engineeringen_US
dc.creatorNgok, Lau-yuen-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/3450-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleLocal buckling of hollow and concrete filled polygonal columns subjectedto axial compression or bendingen_US
dcterms.abstractIn this thesis the local buckling of thin-walled polygonal sections of square, pentagonal, hexagonal, heptagonal and octagonal columns subject to axial compression and uniform bending is investigated. A computer program "THIN-WALL", based on the finite strip method, was used to model the hollow polygonal tubes. Dimensionless elastic local buckling coefficients are presented for a variety of plate width-to-thickness ratios. It is shown that the dimensionless buckling stress coefficient is influenced by two parameters: the nature of the applied loading and the number of sides of the section. The buckling stress coefficient is higher for bent sections than for axially compressed ones, and this difference can be quite significant. Sections with an odd number of sides have an enhanced buckling capacity over those with an even number of sides, with pentagonal sections offering the highest capacity under either axial compression or bending. Ten specimens were also tested to failure under axial compression loading. Five specimens were hollow while five were concrete filled. The specimens ranged from square, pentagonal, hexagonal, heptagonal to octagonal in cross-section. The experimental results showed that the concrete filled tubes had an enhanced buckling capacity over that of the hollow specimens. An axial strength model, used to predict the ultimate load carrying capacity of the tubes, is finally presented. Five of them are hollow sections while the other five are filled with unbonded concrete to prevent inward local buckling.en_US
dcterms.extentxi, 103 leaves : ill. (some col.) ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2000en_US
dcterms.educationalLevelAll Masteren_US
dcterms.educationalLevelM.Sc.en_US
dcterms.LCSHColumnsen_US
dcterms.LCSHBuckling (Mechanics)en_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
b15594786.pdfFor All Users (off-campus access for PolyU Staff & Students only)5.2 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/3450