Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Mechanical and Marine Engineeringen_US
dc.creatorLau, Fuk-Sun-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/3594-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titlePrediction of post-molding shrinkage of plastic parts by laser interferometryen_US
dcterms.abstractPost-molding shrinkage of thermal plastics material has been a major issue for determining the final dimension of plastics parts which require precise dimension and shape for fitting with other parts. Holographic and Speckle interferometry enables measurement of displacement to be made on optically rough surfaces at sensitivity of the order of the wavelength of light. It is therefore suitable for the study of the profile of minute post-molding shrinkage of a plastic part. As the prediction of post-molding shrinkage is an on-line process, Electronic Speckle Pattern Interferometry (ESPI) was adopted as the measurement instrumentation with the consideration of its fast measurement speed and ease of handling. The objectives of the experiment are to develop and utilise the Set-up of ESPI arrangement for the measurement of slow but continuous in-plane displacement; to evaluate the measured data and derive a model for the prediction of long-term shrinkage of plastics parts. In the experiment, 'Derlin' acetal resins parts were chosen as the study medium as these crystalline polymers possess relatively high post-molding shrinkage but respond less to environmental changes such as humidity and temperature. Four types of variation of displacement fringe patterns were observed. By comparing the ESPI data obtained, it was found that the specimens have nearly the same shrinkage coefficient and it was deduced that the difference in shrinkage after 10 years is less than 5um. In other words, if the molding conditions are properly controlled, the plastics part shrinkage behaviour at a given exposure temperature will be the same. A fix model was therefore deduced for the determination of post-molding shrinkage.en_US
dcterms.extent86 leaves : ill. ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued1994en_US
dcterms.educationalLevelAll Masteren_US
dcterms.educationalLevelM.Sc.en_US
dcterms.LCSHLaser interferometers -- Industrial applicationsen_US
dcterms.LCSHPlastics -- Moldingen_US
dcterms.LCSHHong Kong Polytechnic -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
b11406537.pdfFor All Users (off-campus access for PolyU Staff & Students only)2.45 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/3594