Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Applied Mathematicsen_US
dc.creatorTang, Hiu-yeuk Blossom-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/4133-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleNumerical simulation of an open premixed turbulent V-flame using contour advection with surgery : determination of flame surface density and overall burning rateen_US
dcterms.abstractAn open turbulent premixed V-flame is simulated successfully with a robust scheme termed Contour Advection with Surgery. Numerical experiments were performed for both non-reacting and reacting case. In the non-reacting case, comparison with measurements obtained in laboratory studies indicates that the computed integral length scale tends to be larger. However the qualitative trend of evolution of the length scale in the axial direction was similar. In the reacting case, local flame structure is characterized in terms of turbulent flame brush, orientation factor, and the determination of the flame surface density ε. It was noted that velocity fluctuations, flame brush thickness and mean orientation factor all increase with increasing turbulence: The flame surface density profiles were found to be lower at higher turbulence and skewing towards the burnt side was observed. It was also found that maximum flame surface density decreases non-linearly with upstream turbulence whereas the overall burning rate increases non-linearly with upstream turbulence. The values of Bray number NB was also determined for different cases in the simulation and it was observed that NB decreases with the ratio u'/SL. Comparison was made with measurements obtained in laboratory experiments and the agreements are good in general. Values of ε obtained from using the average flame length and flame zone area and the BML formulation are very similar in general but the discrepancy does appear to grow slightly with increasing turbulence intensity. Although it has been proven that there is a finite probability of obtaining |σc| = 0 in the experimental data, the overall burning rate does not seem to be severely affected by assuming the contribution of these parallel flame fronts to be negligible.en_US
dcterms.extentxvi, 168 leaves : ill. ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2005en_US
dcterms.educationalLevelAll Doctorateen_US
dcterms.educationalLevelPh.D.en_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.LCSHTurbulenceen_US
dcterms.LCSHCombustionen_US
dcterms.LCSHFlameen_US
dcterms.accessRightsopen accessen_US

Files in This Item:
File Description SizeFormat 
b18181284.pdfFor All Users3.87 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/4133