Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Mechanical Engineeringen_US
dc.creatorChan, Mo Lin-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/6571-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleDevelopment of a high-strength and uniformly-dispersed nanoclay/epoxy compositeen_US
dcterms.abstractRecently, organomodified montmorillonite (MMT) (commonly called "Nanoclay") has become popular for most composite component development. It is found that only a small amount of nanoclay being added into polymers can enhance their strength without inducing any weight penalty. However, to achieve this goal, the uniformity of nanoclay inside the polymer matrix plays a key role to control the mechanical, thermal, and even electrical properties of resultant composite. Unfortunately, most literatures can only produce localized evidences extracted from samples through either Scanning Electron Microscope (SEM) or Transmission Electron Microscope (TEM) imaging techniques. In this project, a new method to developed homogenous nanoclay cluster/epoxy composite has been conducted. Through experiments, it was found that small nanoclay clusters were formed and evenly-distributed inside the nanoclay cluster/epoxy composite. The size of clusters looks similar and is within the range between 100 and 200 nm. A tensile property test was conducted and followed by the investigation on the samples' fracture behaviour. SEM was used to investigate the homogeneity of the samples with different weight content of nanoclay by the fractographic observation. In addition, TEM was used to provide direct visualization of the fracture structure morphology. TEM image was retrieved that nanoclay clusters with the diameter of 10 nm could induce the mechanical interlocking inside the composites and thus, stopping up crack propagation. The formation of boundaries between the nanoclay clusters and epoxy could refine the matrix grains and could further improve the flexural strength of the composite. In short, a relatively small amount of nanoclay, typically in the range between 3-5 wt.%, can significantly improve the mechanical properties of polymer-based composite. However, most of recent researches have seldom focused on studying the interfacial bonding properties between nanoclay and the matrix for this composite despite that many mechanical and thermal property tests were conducted. In view of this, this study used Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Photoelectron Spectroscopy (XPS) to monitor the structural properties at molecular level of the composite. Both results proved that the chemical bonding at the interface between the epoxy and nanoclay did exist. Based on a forementioned findings, it can be assumed that the bonding in the composite is in a perfect adhesion and thus, this assumption can be used to estimate its mechanical properties, such as the Young's Modulus, ultimate strength and other properties. Many literatures have laid down different equations that can be used to predict different properties of nanoclay cluster/epoxy composite. However, most of them ignored the occupancy of epoxy inside the nanoclay clusters. In this regard, this study found that around 7.5 wt.% of epoxy existed in a cluster, and this result is well agreed with experimental finding. With the consideration of different key material factors, it is found that Eqs. (4) and (11) as shown in Chapter 6 can be effectively used to predict the properties of the composites with the nanoclay content less than 5 wt.%en_US
dcterms.extentxx, 147, [15] leaves : ill. (some col.) ; 30 cm.en_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2012en_US
dcterms.educationalLevelAll Doctorateen_US
dcterms.educationalLevelPh.D.en_US
dcterms.LCSHNanocomposites (Materials)en_US
dcterms.LCSHPolymeric composites.en_US
dcterms.LCSHSmart materials.en_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsopen accessen_US

Files in This Item:
File Description SizeFormat 
b25226538.pdfFor All Users7.05 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/6571