Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Mechanical Engineeringen_US
dc.contributor.advisorSu, Zhongqing (ME)-
dc.creatorLu, Bo-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/8047-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleA numerical approach for modeling carbon nanotube (CNT) percolating network towards development of a CNT-based sensoren_US
dcterms.abstractTo circumvent the drawback of traditional carbon nanotube (CNT) composite sensors in capturing high-frequency dynamic strains in micro level, which largely hampers the application of the sensors in guided-wave-based structural health monitoring (SHM), a multi-scale numerical approach was developed in this M.Sc. dissertation project to facilitate the improvement of the electromechanical behavior of existing CNT composite sensors. A Finite Element (FE) model of CNT/polymer composite, including a pair of adjacent CNTs and polymer matrix, was established to study the local strain-resistance relationship of CNT composite subject to tunneling effects. And the resistance response of the model subject to dynamic strains was also examined with and without the influence from the viscoelastic property of the polymer matrix. A numerical model comprising of a significant number of CNTs was then built to study the statistical behavior of CNT resistor network. The overcall electrical conductivity of the model was calculated based on Kirchhoff Current Law (KCL) and matrix representation method. By adjusting the weight fraction of the CNTs, the percolation threshold of the model was estimated, showing great similarity with existing experimental results. More importantly, the piezoresistivity of the CNT network was comprehensively studied, subject to both tensile and compressive strains. Exponential and linear distributions of resistance change ratio were observed under large and small strain levels, respectively. Moreover, the characteristic of the model{174}s piezoresistivity under harmonic excitation was simulated and discussed. As a proof-of-concept investigation, some experiments were conducted to validate the observations obtained from the proposed multi-scale numerical approach. The fabrication of CNT/polymer composite sensors was introduced. And the percolation thresholds of the sensors were measured and compared with numerical results. Moreover, signals of lamb wave, which were widely adopted in practical SHM, were captured and analyzed using the fabricated sensors. Finally, some important conclusions were made depending on the proposed numerical approaches, revealing the limitations of existing experimental configurations. And some suggestions were given subsequently (e.g., increasing the percentage of tunneling resistances by conducting surface treatment of the CNTs), relying on which the sensitivity and stability of the composite sensors were expected to be largely improved.en_US
dcterms.extentxv, 187 leaves : illustrations ; 30 cmen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2015en_US
dcterms.educationalLevelAll Masteren_US
dcterms.educationalLevelM.Sc.en_US
dcterms.LCSHCarbon nanotubesen_US
dcterms.LCSHDetectorsen_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
b28178531.pdfFor All Users (off-campus access for PolyU Staff & Students only)8.53 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/8047