Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor | Department of Mechanical Engineering | en_US |
| dc.contributor.advisor | Fu, Ming Wang (ME) | - |
| dc.creator | Li, Wenting | - |
| dc.identifier.uri | https://theses.lib.polyu.edu.hk/handle/200/8053 | - |
| dc.language | English | en_US |
| dc.publisher | Hong Kong Polytechnic University | - |
| dc.rights | All rights reserved | en_US |
| dc.title | Multi-stage micro deep drawing process of micro cup with domed bottom and it's size effects | en_US |
| dcterms.abstract | Recently microparts are increasingly needed in numerous industrial products found in many sectors, such as automotive, medical, telecommunication and so on. However, size effects are extremely important to influence on the manufacturing of microparts. In-depth understanding the deformation mechanism of microparts and designing methods to avoid defects during the manufacturing process will contribute to the development of industrial microparts. In this thesis, grain size effect on the multi-stage micro deep drawing process of micro cup with domed bottom is investigated deeply. A two-stage micro deep drawing system is designed to manufacture the micro cup with the domed bottom. Physical experiments are conducted by employing copper circle blanks of 0.2 mm thickness annealed at three different conditions, viz. 500, 600 and 750 °C with the holding time of 1, 2 and 3 hours respectively. Furthermore FEA simulation is used to study the effect of friction on the deformation load and verify the whole drawing process. The aim is to study the deformation defect, the grain size effect on deformation behavior and thickness variation of micro cups and the friction effect during the multi-stage micro deep drawing process. It reveals that blanking significantly affects the micro part’s deformation, earing and misalignment can be magnified, and the deformation load decreases with the increase of grain size in the multi-stage micro deep drawing process, while the grain size effect is not obvious in the second-stage micro deep drawing process. The friction coefficient effect on the deformation load is studied in FEA simulation as well. It can be observed that the deformation load increases with the increase of friction coefficient. Moreover, the micro part with larger grain size has more nonuniform thickness and severer thinning around the punch corner. Additionally, deformation load and thickness in simulation qualitatively agree with the values in the physical experiments. | en_US |
| dcterms.extent | x, 66 leaves : illustrations (some color) ; 30 cm | en_US |
| dcterms.isPartOf | PolyU Electronic Theses | en_US |
| dcterms.issued | 2015 | en_US |
| dcterms.educationalLevel | All Master | en_US |
| dcterms.educationalLevel | M.Sc. | en_US |
| dcterms.LCSH | Microtechnology. | en_US |
| dcterms.LCSH | Hong Kong Polytechnic University -- Dissertations | en_US |
| dcterms.accessRights | restricted access | en_US |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| b28179705.pdf | For All Users (off-campus access for PolyU Staff & Students only) | 15.04 MB | Adobe PDF | View/Open |
Copyright Undertaking
As a bona fide Library user, I declare that:
- I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
- I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
- I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.
By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.
Please use this identifier to cite or link to this item:
https://theses.lib.polyu.edu.hk/handle/200/8053