Full metadata record
DC FieldValueLanguage
dc.contributorDepartment of Mechanical Engineeringen_US
dc.contributor.advisorCheung, C. S. (ME)-
dc.creatorLi, Dongfang-
dc.identifier.urihttps://theses.lib.polyu.edu.hk/handle/200/8593-
dc.languageEnglishen_US
dc.publisherHong Kong Polytechnic University-
dc.rightsAll rights reserveden_US
dc.titleExperimental investigation on performance and emissions of a direct-injection diesel engine fueled with biodiesel-ethanol blendsen_US
dcterms.abstractTo reduce air pollution and reliance on fossil fuel, biofuels have been widely investigated for potential application in diesel engines. The purpose of this study is to clarify the influences of biodiesel-ethanol blends on the performance, combustion properties and emission characteristics of a diesel engine. Experiments were conducted on a direct-injection diesel engine fueled with biodiesel, BE5 (95% biodiesel and 5% ethanol on volume basis, v/v), BE10, BE15 and diesel, relatively under 5 different engine loads from 10% to 80% of the full load and with a constant engine speeds of 1800RPM. Biodiesel could lead to higher nitrogen oxides (NOX) emissions and larger numbers of smaller particles compared with standard diesel fuels. Therefore, investigations based on the biodiesel-ethanol blended fuels were conducted in this study. It is found that the blended fuels result in decreased particular matter (PM), carbon monoxide (CO) and unburned hydrocarbon (HC) emissions, as well as reduction in the NOX emissions and the geometric mean diameter (GMD) of the exhausted particles. Compared the pure biodiesel and ultra-low sulfur diesel (ULSD), biodiesel-ethanol blended fuels could also reduce the total number concentration (TNC) of the exhausted particles. The number-fraction of volatile and non-volatile substance in the particles were investigated through the scanning mobility particulate sizer (SMPS) associated with a thermo-denuder (TD). The number based volatile particles for all the testing fuels first decreased and then increased with the engine load. It could be found that particles produced by biodiesel-ethanol blended fuels exhibited higher volatile fraction than those produced from diesel and biodiesel fuels at all the engine loads. In addition, for particles with diameter in the three size groups (DP < 50 nm, 50 nm < DP < 100 nm, DP >100 nm), the volatile fraction in particles with diameters less than 50 nm exhibited higher at low engine load, while at medium and high engine load the particles with diameters 50-100 nm showed higher values in volatile fraction for each tested fuel. While for the particles with diameter above 100nm, an increasing trend of the proportion of volatile substances with the increasing engine load was observed. Particulate samples were collected at all the five engine loads for analyzing the particulate size, morphology and nanostructure characteristics. Higher engine load could contribute to higher primary particulate diameter and less disordered nanostructure for all the testing fuels. Ethanol fraction in the blended fuels showed a positive effect on reducing the primary particulate size, however, the tortuosity of the nanostructure of the particles exhibited an increasing trend with the increasing ethanol percentage, indicating that particles from biodiesel-ethanol blends should have shorter and more curved graphene layer, compared with those generated from pure biodiesel and standard diesel.en_US
dcterms.extentiv, 127 pages : color illustrationsen_US
dcterms.isPartOfPolyU Electronic Thesesen_US
dcterms.issued2016en_US
dcterms.educationalLevelAll Masteren_US
dcterms.educationalLevelM.Sc.en_US
dcterms.LCSHBiomass energy.en_US
dcterms.LCSHDiesel motor -- Alternative fuels.en_US
dcterms.LCSHDiesel motor -- Combustion.en_US
dcterms.LCSHDiesel motor exhaust gasen_US
dcterms.LCSHHong Kong Polytechnic University -- Dissertationsen_US
dcterms.accessRightsrestricted accessen_US

Files in This Item:
File Description SizeFormat 
b2910936x.pdfFor All Users (off-campus access for PolyU Staff & Students only)4.68 MBAdobe PDFView/Open


Copyright Undertaking

As a bona fide Library user, I declare that:

  1. I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
  2. I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
  3. I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.

By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.

Show simple item record

Please use this identifier to cite or link to this item: https://theses.lib.polyu.edu.hk/handle/200/8593