Full metadata record
|dc.contributor||Department of Applied Physics||en_US|
|dc.contributor.advisor||Lei, Dangyuan (AP)||-|
|dc.contributor.advisor||Dai, Jiyan (AP)||-|
|dc.creator||Ho, Kwun Hei Willis||-|
|dc.publisher||Hong Kong Polytechnic University||-|
|dc.rights||All rights reserved||en_US|
|dc.title||Novel plasmonic metal-semiconductor hybrid photocatalysts for enhanced organic decomposition||en_US|
|dcterms.abstract||Electron-hole pair separation is a crucial process to realize solar energy harvesting which can drives most of the photocatalytic reactions on the semi-conductor surface. Plasmon-induced hot carrier generation unleash optical band gap limitation, extending the solar energy conversion spectrum to visible and near-infrared range. This is regarded as a promising alternative for the electron-hole separation process. However, the plasmonic-induced hot carrier generation and extraction efficiency remain low, hindering the large-scale application. In this thesis, a wide range of plasmonic metal/semiconductor hybrid nanostructures are synthesized by wet chemistry method which aims to join semiconducting titanium dioxide (Ti02) with metallic plasmonic nanostructure into many different configurations. More importantly, this thesis demonstrates a highly efficient strategy to extract the hot carries by assembling plasmonic metal/semiconductor hybrid nanostructures on Au film to construct a plasmonic film-coupled nanocavity system.||en_US|
|dcterms.abstract||The main results are summarized as follow: 1. Uniform Gold nanorods (GNR) are synthesized via seedmediated method, realizing a flexible tuning on the plasmonic response over the visible to infrared range. Besides, by the precise control of the titanium chloride (TiCl₃) hydrolysis process, metallic plasmonic nanostructures such as GNR and Au nanosphere are coated with a semiconducting Ti0₂ shell or be further decorated with metallic co-catalyst. This results in a monodispersed plasmonic/semiconductor hybrid structure which makes the plasmonic particle promising for the plasmonic-induced photocatalytic reactions. The preliminary photocatalysis results suggest that the morphology design of plasmonic/semiconductor hybrid structure is of high importance for photocatalytic reaction, since the spatial separation of electron/hole pair can supress the recombination. 2. A film-coupled plasmonic photocatalysis system with an extraordinary hot carrier generation and extraction efficiency 1s constructed by assembling Au/Ti0₂ dumbbell nanostructures on a thin gold (Au) film. Benefited from the Au thin film, the film-coupled system has an enhanced photon absorption efficiency accompanied with an amplified plasmon resonance near field strength on the Au nanostructure. This resulted in a remarkable enhancement on both photocurrent (> 10 times) and photocatalysis reaction rate (> 3 times) compared with the counterpart's dumbbell nanostructures assembled on an ITO film. Under the excitation of the localized surface plasmons in this particle-on-film nanocavities, the on-top GNRs serves as an efficient hot electron generator, consequently injecting hot electrons over the Au/Ti02 Schottky barrier to participate in the photocatalytic reaction occurred on the Ti0₂ surface. Apart from the plasmonic hot carrier generation, an alternative hot carrier generation mechanism is jointly confirmed by the incident-wavelengthdependent photocurrent and spectra dependent reaction rate measurements where hot electrons are generated through the Au film optical d-band transition. This mechanism is a secondary hot carrier source which promotes additional hot electron to the film-coupled nanocavity system and spontaneously contributes to the photocatalytic reactions. 3. The strong coupling plasmonic film-coupled system is constructed by depositing with an ultra-thin Ti02 semiconducting layer on an Au film. This thin Ti0₂ layer acts as a hot electrons collector and a optical spacer to sustain a gap hybridized resonance mode of the atop plasmonic nanostructures. The plasmonic resonance is characterized by a singleparticle darkfield optical measurement, revealing three plasmon resonance modes supported in this system: Dipolar resonance mode, gap hybridized plasmonic resonance and magnetic resonance mode. More importantly, the wavelength-dependent photocurrent measurement suggests the hybridized magnetic resonance mode has an outstanding photocurrent enhancement at the near-infrared region. This result explored a new photocurrent generation mechanism, also provided a basis for the future theoretical study.||en_US|
|dcterms.extent||viii, 114 pages : color illustrations||en_US|
|dcterms.LCSH||Hong Kong Polytechnic University -- Dissertations||en_US|
Files in This Item:
|991022197536303411.pdf||For All Users||16.69 MB||Adobe PDF||View/Open|
As a bona fide Library user, I declare that:
- I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
- I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
- I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.
By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.
Please use this identifier to cite or link to this item: