Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor | Multi-disciplinary Studies | en_US |
| dc.creator | Tam, Kin-lun | - |
| dc.identifier.uri | https://theses.lib.polyu.edu.hk/handle/200/998 | - |
| dc.language | English | en_US |
| dc.publisher | Hong Kong Polytechnic University | - |
| dc.rights | All rights reserved | en_US |
| dc.title | A reconsideration of the suitability of seismic design for highway bridges in Hong Kong | en_US |
| dcterms.abstract | This dissertation is initiated to reconsider the suitability of current seismic design for highway bridges in Hong Kong. In construction of bridges in Hong Kong, both wind load and seismic load have been considered in accordance with the Structural Design Manual for Highways and Railways issued by Highways Department of Hong Kong. According to the code of practices, the design ground peak acceleration is 0.07g (g is the gravity acceleration) which is underdesigned compared with the recent researches. The estimated ground peak acceleration in Hong Kong is about 0.08g (GEO report No. 16, 1992) and O.1Og in Chinese seismic zoning map. In order to investigate the adequacy of the current seismic design in Hong Kong, the reference to two other national codes of practices, the Standard Specifications for Highway Bridges issued by American Association of State Highway and Transportation Official (AASHTO) used in USA and the Draft of Anti-seismic Design Code for Highways used in China had been included in the scope of this dissertation. The seismic loads obtained from each code had been studied and compared with each other. The effects of span length of the superstructure and the height of substructure, e.g. piers, on the performance of bridges under seismic loads were studied and illustrated with design examples. In the study, the results reveal that highway bridges in Hong Kong with slender columns have sufficient strength to resist the major earthquakes. However, for the bulky short columns, the seismic forces using current Hong Kong practices was under estimated compared with AASHTO and Chinese Code. Moreover the reinforcement detailing design in the current design practice is inadequate compared with AASHTO and Chinese Code. A consensus on appropriate seismic design procedures for designing highway bridge in Hong Kong was urgently required. | en_US |
| dcterms.extent | x, 214 leaves : ill., maps (some col.) ; 30 cm | en_US |
| dcterms.isPartOf | PolyU Electronic Theses | en_US |
| dcterms.issued | 1997 | en_US |
| dcterms.educationalLevel | All Master | en_US |
| dcterms.educationalLevel | M.Sc. | en_US |
| dcterms.LCSH | Bridges -- China -- Hong Kong -- Design and construction | en_US |
| dcterms.LCSH | Earthquake resistant design | en_US |
| dcterms.LCSH | Hong Kong Polytechnic University -- Dissertations | en_US |
| dcterms.accessRights | restricted access | en_US |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| b13986284.pdf | For All Users (off-campus access for PolyU Staff & Students only) | 4.6 MB | Adobe PDF | View/Open |
Copyright Undertaking
As a bona fide Library user, I declare that:
- I will abide by the rules and legal ordinances governing copyright regarding the use of the Database.
- I will use the Database for the purpose of my research or private study only and not for circulation or further reproduction or any other purpose.
- I agree to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage.
By downloading any item(s) listed above, you acknowledge that you have read and understood the copyright undertaking as stated above, and agree to be bound by all of its terms.
Please use this identifier to cite or link to this item:
https://theses.lib.polyu.edu.hk/handle/200/998